SEAI-Grant | Best Window Services

SEAI - Grant

Homeowners installing energy-efficient windows and doors may qualify for government grants of up to:

€4,000 for windows

€800 per exterior door (up to 2 doors)

€5,600 total for single-family homes

Free consultation

Grant Application Guidance

Professional Installation

Final BER & Grant Claim

Property Type	Windows Grant	Doors Grant (Max 2)	Total Possible
Apartment	€1,500	€800 per door	Up to €3,100
Mid-Terrace	€1,800	€800 per door	Up to €3,400
Semi-Detached / End of Terrace	€3,000	€800 per door	Up to €4,600
Detached	€4,000	€800 per door	Up to €5,600

To take advantage of the WRAP Program, you must meet all of the following conditions:

Your home had to be constructed and occupied prior to 31 December 2010. You must have a current and valid Meter Point Reference Number (MPRN) that can be found on your utility bill.
You are replacing existing windows or doors.
You used a contractor registered with the SEAI for this installation.
The new windows and/or doors must meet a U-value of 1.4 W/m2K or better.
Your minimum HLI must be at or below 2.3 W/m2K after the upgrade.
A Building Energy Rating (BER) Assessment is required before applying for funding.
You must submit an application through SEAI’s online application process.

Check Eligibility: Ensure your property was built before 2011. You may need an up-to-date BER assessment to verify if your home meets the required insulation/heat loss standards.
- If the home previously received SEAI grants for attic and wall insulation, then good insulation is in place.
- Check your existing BER If your existing BER has an Advisory Report, check to see if your attic and wall insulation is ‘Good’ or ‘Very Good’.
- If you still don’t know if your attic and walls have good insulation, get advice from a BER Assessor.
Get Quotes: Contact an SEAI-registered contractor like Fabwindows. Obtain a detailed quote ensuring the new windows/doors meet the required U-value standard. Fabwindows offers windows with U-values ranging from 0.75 to 1.2 W/m²K, significantly surpassing the recommended grant requirement of 1.4 W/m²K.
Apply for Grant: Submit your application through the SEAI online portal. Find it here https://hes.seai.ie/GrantProcess/ApplyForGrantAfterWizard.aspx
- Important:Do not begin any work until you receive your formal grant offer.
Complete Installation: Have the registered contractor like Fabwindows carry out the work.
Post-Works BER: Arrange a mandatory post-works BER assessment to verify the improvement.
Submit & Get Paid: Submit all required documentation to the SEAI to receive your payment.
- Declaration of Works
- Post-works BER